I have 3 vintage leather strops each measures 2 1/2" x 24" All in good used condition. Strops in this size sell for $75-150 new. I am asking $20 for the single strop and $35.00 for the double or $50.00 for all 3.

Marples 6 carving chisels very nice set M156

$120.00

Marples 6 Carving MIB

$115.00

Graves  good user split handle

 $18.00

Sorby Gouges  nice 1''x12-1/4''long and 9/16"x11-3/8" long

$ 50.00 the pair

From the days when men were men we have a 2" framing slick from Hills of Galt Ontario. Overall in very good condition. Sometime in the past the handle was broken and the socket has some damage from being hammered. It has been re-handled and is 21 1/2" overall. You can see the damage in the picture below.

$35.00

An unmarked brass back a good user

  $ 25.00

I have 2 Linco bevel edge socket style chisels. Made in Sweden they look like A E Berg Shark logo chisels. They are both in good++ condition with solid handles. Sharp and good quality.

 Chisel #1 is 1/2"x10" overall

 Chisel #2 is 1"x10" overall

$20.00 each or $35.00 for the pair

Here is a Berg  bevel edge butt chisel. It has been rehandled and measures 1"  x 4 1/2" .

 $22.00

Here we have a Jernbologet bevel edged chisel marked Eskilstuna in great condition. It measures 1 1/2"  x 6 1/4"

$42.00

Eskilstuna chisels

left to right

Berg 9/16" bevel  $22.00         Berg 1" Butt  $117.00           Eskilstuna 1" bevel    $30.00            Berg 9/16" Gouge  $42.00          Berg 1 3/8" gouge $53.00

Here is a nice vintage saw set.  It is clean and complete but unmarked. I think it is a Taintor's Positive by comparing pictures.

$19.00

Here is a E.C.Atkines&co saw made in Indianapolis rose wood handle , handle has a small chip no big deal  six points to the inch

$125.00

I can't find a makers name on this interesting old saw set. In working condition.

$15.00

Great little jointer made by Maple Leaf saw works of Galt Ont. Made just after the takeover by Shurly-Diettrich-Atkins No 46. In good++ usuable condition. Excuse the picture if you need another I will try to send them.

$20.00

A vintage saw set from Stanley. No number just marked Stanley and made in USA it appears to work well.

$17.00

One of the best axe heads produced in Canada. This True Temper Black Prince has been soaked to remove surface rust..

$28.00

Most chisels have been rehandled but are in good or better condition.

(A) Pexto 1"x12 1/2"       $15.00                            (B) Hearnshaw Bros. Sheffield 1"x9 3/4"  $20.00

(C) Mibro 7/8"x9 1/2"    $12.00                            (D) Mibro 3/4"x10"   $12 or $20 the pair

  (E) Stanley Handyman H1250 1/2"  $12.00                   (F) Henry Boker 1"  $24.00 SOLD

            (G) James Swan  1" x8 1/2" bevel  $25.00          (H) W. Marples & sons 7/8" x 6 1/4" bevel  $18.00

        (I) Canadian Champion 3/4" x 6"   $17.00             (J) Mathieson Glascow 5/8" x 4 1/2"    $15.00

   (K) Canadian Champion Mortise 1/4" x7"  $16.00            (L) James Swan 1" x 5 1/2" bevel $16.00

    (M) Robert Sorby 5/8" gouge       $20.00                        (N) Ward 5/8" gouge (some pitting) $10.00

      (O) Marples&Sons  3/8" bevel edge   $16.00                                      (P) Spear & Jackson 1/2" firmer   $15.00

    (Q) 3/8" Robert Sorby Mortise  $18.00                                           (R) 5/8" Mibro bevel edge   $15

   (S) can't read maker Sheffield  $15.00                                            (T) Canadian Champion  7/16" Mortise $17.00

         (U) Stanley H1251 1" bevel    $16.00                                              (V)  Canadian Champion 1" bevel  $16.00

   (W) Canadian Champion 1 1/2" bevel     $28.00

Some pitting on one side but generally a great chisel. Has been rehandled and ready to work. This one is a brute the blade is 3/8"x3/4".

$24.00

Here is a fine vintage Lion axe head. It has been soaked to remove surface rust. I understand Lion was made by True-Temper for American Fork & Hoe

$25.00

This Canadian made slick by Josiah Fowler of St Johns New Brunswick it was forged circa 1860 . It is 11" overall and the blade end is in good+ condition. It appears a previous user has used it as a splitting wedge and the handle was lost and the socket mushroomed. I was cut off and there is about 1 1/2" of socket left but will require cleaning and swedging to the socket. Still a nice piece for any collction of early Canadian tools.

http://www.davistownmuseum.org/bioFowler.html

$27.50

A fine unmarked pad saw possibly made of ash. Good brass fittings and a good blade. A nice addition to any collection or a great piece for the chest. The saw blade packs into the handle.

$35.00

I can't find a makers name or mark on this fine vintage Gentlemens tenon saw. No serious pitting on the blade and still cuts well.

$25.00

                                                                                            To place an order         

  darbystools@gmail.com